Seitenhistorie

Reworked frontend for energy contract creation and managed in the settings.

Visualization of the created contract files of the current node, as well as the corresponding underlying nodes.

Contract files can be created for each medium, within each contract versions can be created and managed. Contract versions can be created historical and for future time frames, including configurable periods of validity.

Optional contract details can be added to each contract.

When entering the contract periods, a collision detection is performed in the background. If a time gap or an overlap occurs, a corresponding note is displayed in the input window.

For calculation and visualization of costs and emissions the contract conditions for the different time frames is used.

Differentiation between tariffs "peak" and "off-peak", including separated rates.

Differentiation between "calorific value" and "net calorific value":

• Calculation of costs for natural gas based on the calorific value
• Calculation of CO₂-emissions for natural gas based on the net calorific value
• Automated conversion function for net calorific value

Listing of all subnodes, data point assignments and contract files, which will be deleted simultaneously by deleting the selected node.

Bugfix: Time offset of measurement data corrected.

By using the USB / RS485 converter cable (Art. no. 15.06.107) a direct connection of a measurement device to the Cloud Connector can be established through Modbus-RTU.

Measurement devices, which are directly connected through Modbus-RTU, can be added by using the function for manual adding of devices in the webfrontend of the Cloud Connector.

In the function for manual adding of devices in the webfrontend of the Cloud Connector, a secured connection to the devices through https can be chosen and credentials with user and password for the connection can be added.

Extension of the device-specific visualization in the web frontend of the Cloud Connector with more detailed information about the configuration of the specific device.

Display of the specific detailed view by using the navigation bar on the left side of the web frontend.

Listing of the configured active energy values for recording on the device with information about channels and recording interval.

Hints will be displayed on the web interface, when the recording configuration does not fit to the necessary value set or time intervals for correct visualization in the GridVis® Cloud.

• Optimizations in cloud data bases and in cloud environment for better performance.
• Preparations in data structures and architecture for coming product features.
• Extension of automated backup functionality.

Those changes do not affect the functions and the visualized data.

Bugfix: Calculated total costs and emissions from lower nodes are not marked as warning any more.

Bugfix: Produced energy can be used in the comparison functionality.

Bugfix: Timestamp in tooltip function.

Bugfix: Icon is displayed when contract is missing.

Selection of a specific time range in the past by using the new calendar icon. Simplified selection, complementary to arrow buttons, depending on the currently selected time range (day, week, month, quarter, year).

Currently displayed consumption values can be exported.

• There is a three-bar menu icon placed in the upper right corner of the diagram, which can be used to access a submenu.
• The consumption values can be exported as a csv file.
• The consumption values can be exported as a xls file.
• The current view of the diagram can be exported as a png file (image file).
• The exported data is based on the currently selected time period and the activated media.

Currently displayed consumption curve can be exported.

• There is a three-bar menu icon placed in the upper right corner of the diagram, which can be used to access a submenu.
• The current view of the diagram can be exported as a png file (image file).
• The exported data is based on the currently selected time period and the activated media.

Display of a note in case of deviating recording intervals of the active energy values.

• Checking the transmission intervals of the active energy values per measuring device
• Display of a note in the corresponding column in the tabular overview
• Display of a note for each affected measured value (for measured values with longer set intervals)

The serial number of the measuring device is also displayed in the hierarchy editor:

• In the tooltip for each entry in the list of available data points (accordion)
• In the tooltip on the icon of an already assigned data point at a node

The list of connected data points is extended by a newly added sublist per measuring device for all active energy values:

• Prerequisite for this visualization of all values is a complete configuration of the corresponding measurement in the recording configuration of the device.
• The following values can be shown: Balance (active energy), Consumed (active energy consumed), Supplied (active energy supplied)
• The sublist is expendable and can be used, as soon as the device has configured the right value
• Additional information (e.g. time stamp for last readout) and hints are shown for each value

• Assigning additional items - more than allowed by the used license - is inhibited.
• Data points, which would use a item, are shown grayed out in the list and cannot be assigned any more to the hierarchy. (Hint: data points from devices can still be assigned if a data point is already assigned from the same device and the item has been counted.)
• The information box on the top right corner of the hierarchy editor displays a hint on the maximum usage of the items.

Above the accordion a search filter is available, with which the list of available data points can be filtered by their naming and properties. Hidden data points can also be found by using the search filter.

Visualization of a device specific view, when clicking on the corresponding tile for the device.

Extended visualization of the values inside the corresponding consumption tile per medium:

• The current consumption (current bar) is displayed on the right side in each consumption tile.
• The whole consumption of the currently chosen period, which is also shown in the bar chart for the whole chosen period, is listed as a numerical value on the left side in each consumption tile.

• While changing the dashboard view to costs or CO₂, the values inside the consumption tiles are also converted into the corresponding unit.
• When a contract is missing in the settings for the current node, hint is shown instead of the converted values.

In the comparison-visualization in the bar chart diagram the numerical consumption values of each shown period are placed in the corresponding tile.

After an update a one-time dialog is shown for each user, which informs about the execution of a update. The update dialog also contains a direct link to the release notes inside the online help for the GridVis® Cloud, which will be opened in a new browser tab.

By mouseover on this field, a tooltip is shown in which the currently used items an their split into used data points and users can be analysed, as well as additional information about the used license.

• Medium "Other" is not visible and cannot be used any more.
• In case no data point is available for a medium, the area inside the accordion for this medium is hidden.

The Cloud Connector checks the recording configuration of the connected Janitza devices (expected configuration: Active energy consumed value and active energy supplied value in 15 minutes sample interval). In case of missing recording values, a warning symbol is displayed in the frontend of the Cloud Connector, placed in the corresponding tile of the affected device.

• Improved design for a better perception of the main node
• New placement of the navigation arrows for opening lower nodes in front of the name of a node
• Graphical mark of energy producer nodes via icon

• New placement below the data point list (accordion)
• Reworked dialogue to create new manual data points, including a new selection of medium

A Cloud Connector can also be assigned to a project without a direct login in the Janitza ID via a key generated by Janitza.

During the process of adding new devices to the Cloud Connector (right after the devices have been detected by the Cloud Connector within the network), an indication is displayed on the web frontend that the process is still running in the background.

The used items are counted and displayed according to the license model of the GridVis® Cloud.

The following items are counted:

• Users assigned to the license via Janitza ID
• Manual data points
• Measurement devices connected via Cloud Connector and assigned to the hierarchy

The number of used items is displayed in the license tile in the settings.

The number of used items is displayed in the Janitza ID in the license settings.

Display of multiple projects in the GridVis® Cloud

Via the submenu in account management in the top right area, the displayed project can be changed if the currently logged in Janitza ID is assigned several licenses and thus also several projects of the GridVis® Cloud.

The activity status of the license in use is checked and an error message is displayed if it expires.

After the introduction of the new user roles "Viewer" and "Admin" (managed using the Janitza ID), the restrictions of the functionalities are now active.

For the "Viewer" role, the following functionalities are no longer usable:

• Project settings
• Hierarchy editor
• Contract editor
• Input of manual measurement data
• Link to the hierarchy editor in the sidebar
• Link to contract editor on the analysis page

Design conversions

Search field in the hierarchy bar is now displayed as a "Search" button in the header.

Dashboard

Time periods with the time change (March and October) have been adjusted so that the time change is correctly taken into account.

Optimization of the year view for better display performance.

All devices for which measured values are stored in the GridVis® Cloud are displayed in the list of available data points (= accordion), regardless of how up-to-date they are.

Optimizations of the Web interface with improved responsiveness.

During the claiming of a new Cloud Connector, a project can be selected if multiple licenses and projects are assigned to the Janitza ID used.