The data points displayed in the GridVis Cloud can be clearly listed as a table on the corresponding Data Points tab and additional information about them can be displayed. Manual entry of measured values for corresponding manual data points is also possible on this tab.
Note
After selecting a node, the data points associated with that node are highlighted by a blue line at the beginning of the row.
Listing of the data points
The data points table, in parallel with the dashboard and the analysis area, also filters based on the selected hierarchy node. Only the data points that are assigned to the currently selected hierarchy node or the child nodes below it are displayed in the table.
The following information is displayed in the list of data points:
| Data point | The assigned measurement points are displayed with the associated measurement device designation and, as a smaller information text, the measurement device type, phase and counting direction (both for electricity only). |
| Hierarchy node | The name of the hierarchy node to which the corresponding measurement device is assigned is displayed. |
| Source | The connection through which the data of the data point is transferred is shown as the source. This can be done automatically by a Cloud Connector (data is automatically transferred to the GridVis Cloud) or must be managed in the GridVis Cloud for a manually created data point (see also Entering measurement data manually). |
| Medium | The medium of the corresponding data point is displayed as an icon. |
Alarm | If there is a problem with the corresponding data point, a notice symbol is displayed in the Alarm column. Positioning the mouse cursor on the corresponding symbol displays an additional text with information about the possible cause. |
| Last readout | The time stamp of the last measured value available in the GridVis Cloud is displayed. Measured values from the same day are only displayed with a time. If the last measured value is from the previous day or older, the time stamp is additionally displayed with a date. In the case of an outdated measured value, the time stamp is displayed in orange. |
| Last meter reading | The last meter reading for the corresponding data point available in the GridVis Cloud is displayed. The measured value is accordingly the measured value that was transmitted at the displayed time instant. |
| Actions | If actions are possible for a data point, a corresponding icon is displayed as a button. |
Possible alarms
The following alarms may occur:
| Note | Possible cause | Troubleshooting procedure |
|---|---|---|
| The meter readings available in the GridVis Cloud are out of date.
Meter readings via the Cloud Connector: > 1 hour Manually entered meter readings: > 31 days | Meter readings via the Cloud Connector: Check the connection status
Check the connection status
Eliminate any connection problems on the network connection and/or serial connection sides. Manual meter readings: Enter the current meter reading using the action button on the Data Points tab. |
